SNOPRO-100 control

SNOPRO-100 Series


Home / Outdoor Controllers

The SNOPRO-100 Series are snow/ice melt all-in-one control units, exceptionally capable deicing controllers. Applications include pavements and sidewalks, loading docks, roofs, gutters, and downspout snow/ice melting in residential, commercial, and industrial environments. The SNOPRO-100 WiFi is compatible with the Warmup WSM Snowmelting App. The controls are available in a single phase or three phases. In addition, the control is supplied by 120V and has load voltages of 208V-600V.

 

Does the SNOPRO-100 require a high-limit sensor?

The function of the high-limit sensor to monitor the slab temperature and protect the system against thermal runaway. Therefore, “YES”, both versions of the SNOPRO-100 require the high-limit sensors to be wired  to terminals 10 & 11 in the controller, either by the high-limit sensor that is included in both SNOPRO-100 or by putting in a 470k resistor as outlined on page 11 of our manual. The high-limit sensor should be installed regardless of whether the SNOPRO-100 is used at a satellite or a stand-alone to protect against thermal runaway.

Read more
Wiring
Bathroom Collection
Floor Heating
Insulation
Outdoor Controllers
Pipe Trace
Repairs
Snow and Ice Melting
Thermostats
Instant Pricing
Instant Pricing
Get a Quote
Scroll to Top
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.