Warmup’s Dual Cable Tester (DCT) is designed to ONLY measure the resistance of heating cable(s), therefore, do not use the Dual Cable Tester to measure the resistance of a floor sensor, instead use a multimeter set at 20k ohms (Ω).
Dual Cable Tester
Home / Floor Heating
The Dual Cable Tester is a custom built tester for the heating cable business. The Dual Cable Tester monitors up to two cables concurrently and monitors the integrity of both the core to core and core to ground resistance. Throughout the installation, this device will provide a precise resistance reading(s) and flash/sound an alarm if the circuit(s) is interrupted.
Bathroom Collection
- 3iE Energy-Monitoring Thermostat
- 4iE Smart WiFi Thermostat
- DCM-PRO Cable
- DCM-PRO Fleece-Back Membrane
- DCM-PRO Peel-And-Stick Membrane
- DCM-PRO Waterproofing Kit
- Heating Mats – DWM
- Loose Wire – NADWS
- Mirror Defoggers
- Tempo Thermostat
- TH115 Floor Heating Thermostat
- Towel Warmers
- UCCG-4991 Floor Heating Thermostat
- Warmup Insulation Boards – Ultralight
Floor Heating
- DCM-PRO Cable
- DCM-PRO Fleece-Back Membrane
- DCM-PRO Peel-And-Stick Membrane
- DCM-PRO Waterproofing Kit
- Dual Cable Tester
- Foil Heating System – FOIL
- Heating Mats – DWM
- Loose Wire – NADWS
- Warmup Inslab Cable – INSLAB
- Warmup Insulation Boards – Ultralight
Insulation
Outdoor Controllers
- APS-3C
- CDP 2 Remote Control
- CIT-1
- COMMBOX-600
- DS 5 Outdoor Snow Melting Controller
- DS 8 Outdoor Snow Melting Controller
- DS 9 Outdoor Snow Melting Controller
- DS-2C Outdoor Snow Melting Controller
- ETO2 Snow and Ice Melting Controller
- ETO3 Outdoor Snow Melting Controller
- ETOG – Ground Sensor
- GF-PRO
- GIT-1
- SIT-6E
- SNOPRO-100 Series
- TRF-115-005- Roof & Gutter Deicing
- WSM-252W Smart WiFi Panel
- WSM-63 Relay Timer Panel
Pipe Trace
Repairs
- Digital multimeter
- Infrared Thermal Camera
- Megger (acc-megg)
- Repair – Outdoors
- Repair Kit – End Cap
- Repair Kit – Joint
- Repair Kit – Wire
- TDR Meter Cable Tester