Start Wiring your Thermostat by Pulling Power from Terminals 2 and 5 Wiring the WSM-63 and ETO2 together is a great way to be able to control the WSM-63 timer panel with a pavement sensor. Pull the power from Terminals 2 and 5 and input into the L and N on the ETO2 controller. […]
Wiring your Tempo thermostat is simple and straightforward.
The maximum length Warmup recommends you can extend your snowmelt systems lead is 90′.
Yes, the sensor lead can be extended up to 200 meters using same gauge cable. Total resistance of the sensor cable must not exceed 10 ohms.
This post explains how to mount and position your Towel Warmer properly in your space.
This page explains the different circumstances in which you might wire your Towel Warmer to a switch or to a thermostat.
This page explains how to determine which voltage to run to your DCM-PRO heating system.
The cold tail lead and the sensor probe should be run in separate conduits. This will prevent any interference from the cold tail lead affecting the temperature readings from the sensor probe.
That floor probe is an important part of having your floor heating system function properly. Click “Read More” for details.
Learn how to wire your 3iE and probe for both 120V and 240V configurations. Always use a licensed electrican. Click “Read More” for details.
