Home / Installation / DCM-PRO Peel-And-Stick Membrane

How much self leveler goes over the membrane?


DCM-PRO Peel-And-Stick Membrane

A minimum coverage of 1/2”-3/4” of self-leveler is required.

Self-leveling is required to allow installation of small format tiles and other floor types such as glue-down wood and LVT’s, to be laid on top of the DCM-PRO System. When used, it must be a single pour, at least 10mm deep measured from the top of the castellation (total ½” pour). The leveling compound instructions will confirm if it is suitable for use over plastic/vinyl surfaces.

There is no requirement for the self-leveling compound when installing standard tiles.  The system will generally respond faster and perform better with tile adhesive and tiles applied directly over.

pouring ontop of DCM-PRO system

Tip from Warmup: Given the depth of the channels, the leveler must be suitable for use within the range of 10-16mm if applied evenly. To be safe, Warmup recommends leveler is suitable for at least 10-20mm to account for deviations.

Any other questions on the DCM-PRO? Click here for peel-and-stick questions and here for fleece-back.