For thicker pour of up to 6”, elevate the wire mesh on which the cable is tied with bricks, wood blocks or other spacers to float the cable at the desired level. Depending on the construction of the subfloor and in general, in order to improve the efficiency of the system, you may need to apply insulation prior to the pour.
Installation
WIU should be installed with the foil side facing DOWN. Click “Read More” for details.
Designed specifically to enhance the performance of the Foil Floor Heating Systems. Click “Read More” for installation.
This page explains how to extend your lead wire or connect your heater to a thermostat in a remote location.
This page will give you pointers about trimming your cold lead to fit easier in the conduit and electrical box.
This page explains how to wire and program the 4iE thermostat to work with baseboard applications.