Follow these simple installation instructions for the best results. Click “Read More” for all the details.
Follow these simple installation instructions for the best results. Click “Read More” for all the details.
This is dependent upon the amperage of the units that you are trying to install. Each thermostat can carry a load of 15 amps.
Learn how to quickly and easily install your WUDG floor heating thermostat.
Just because the floor heating system can operate with the included floor sensor probe doesn’t mean that it should. Click “Read More” for important installation notes on this subject.
NO: cable must be embedded in thin-set or self-leveling compound. Once dry, the floating wooden floor will be installed on top. Alternatively, select the FOIL heating mats which can be installed without thin set.
You can stick the insulation boards to the concrete slab using regular modified or pre-mixed thin set. We recommend a 1/4 x 1/4” trowel.
You can stick the insulation boards to the concrete slab using regular modified or pre-mixed thin set. We recommend a 1/4 x 1/4” trowel.
You can stick the insulation boards to the concrete slab using regular modified or pre-mixed thin set. We recommend a 1/4 x 1/4” trowel.
You can stick the insulation boards to the concrete slab using regular modified or pre-mixed thin set. We recommend a 1/4 x 1/4” trowel.
Ultralight can not be layered because the thickness will double of amount of movement under the tile which means the floor will not meet the declared wear ratings. Pro Tip: If you need more height, use leveler to prepare the floor as needed followed by Ultralight.