How to Edit Energy Cost on your 4iE thermostat
Do you need to edit something about your energy monitoring feedback on the 4iE? Learn how to easily edit these settings here.
How to Edit Energy Cost on your 4iE thermostat Read More »
questions
Sensor not Triggering may be Low Temperature Cuttoff
You may need to change the setting for the “Low Temperature Cutoff – LTC.” Click “Read More” for an explanation.
Sensor not Triggering may be Low Temperature Cuttoff Read More »
Snow on Pavement After De-icing Cycle Complete
You may need to adjust your “Delay Off” setting. Click “Read More” to learn how to do this.
Snow on Pavement After De-icing Cycle Complete Read More »
Ground Sensor ETOG-56 – Wiring Diagram
Click “Read More” for detailed wiring instructions for version 2.
Ground Sensor ETOG-56 – Wiring Diagram Read More »
ER1 on the Thermostat Meaning
The ER1 message will also occur if no floor sensor is connected to the thermostat. Have your electrician make sure that the sensor probe wires are securely connected in ports 1 and 2 of the thermostat. If sensor was not installed, your thermostat can be programmed to read the air temperature instead by following the steps below.
ER1 on the Thermostat Meaning Read More »
Mounting a 3iE/4iE thermostat in Canada
In order to properly mount your 4iE thermostat, you will need a back-box as well as a mud-ring. Warmup can recommend compatible items.
Mounting a 3iE/4iE thermostat in Canada Read More »
Control of Baseboard Heaters by the 4iE
This page explains how to wire and program the 4iE thermostat to work with baseboard applications.
Control of Baseboard Heaters by the 4iE Read More »
Reset or Power Cycle my 4iE?
First, loosen the screws at the bottom of your unit at shown in the video clip below. Then remove the face of your thermostat by lifting up and off. On the back of the face is a small reset button. Using a small screw driver or writing utensil, press and hold the reset button for 15 seconds. Then place the face of the unit back on making sure the 8 gold pins line up correctly with their counterparts.
Reset or Power Cycle my 4iE? Read More »
How Do I Set the 4iE to Program Itself?
The 4iE® Smart WiFi thermostat, and non-WiFi version, learn the heat-up and cool down rates of your home to automatically set the most efficient temperatures when you’re away, reducing usage by up to 25%.
How Do I Set the 4iE to Program Itself? Read More »
4iE Features Only Available through the MyWarmup Portal
Some features are currently only available through the MyWarmup portal. Click “Read more” to see which ones.
4iE Features Only Available through the MyWarmup Portal Read More »