|
Warmup® Underfloor Matting Systems are designed to be tough enough for professional use, yet easy to install for do-it-yourself enthusiasts. The radiant heating cable is attached to a tough fiberglass mesh. Simply roll out before laying your flooring, and connect to a programmable thermostat.
So luxurious, yet so easy...
Economical and environmentally friendly
Depending on the insulation qualities of the floor, the matting system costs as little as 13¢ per day to run using the clean power of electricity. A Warmup® Matting System heated floor creates only the minimum of air currents, unlike heating vents which act as dust traps and create drafts that move dust and irritants around the room! For sufferers of asthma and allergies, this can cause major health problems. Warmup is recommended by the Asthma Foundation.
So simple to install
The Matting Systems dual-core heating element comes with only one power lead to wire. It is easy to install in just a matter of hours, without raising floor levels. The cable is attached in a series of loops to thin, yet tough mats, to fit rooms from 10 sq. feet.
Unseen luxury
As well as freeing up wall space normally taken up by heating vents, the matting system is completely invisible so that all that is on view is a discreet thermostat.
Maintenance free
The Warmup® Underfloor Matting System has no moving parts to service or go wrong. Once, it is installed and the floor has been laid, set the thermostat and forget it! The only reminder comes each morning when you step onto a deliciously warm floor.
24 hour support
Installing the matting system is incredibly easy but we still offer 24-hour support to every customer to answer general questions and one-off queries concerning unusual situations.
Please note: You do not need specialist skills to lay the heating element (in accordance with local building code) but you must use a certified electrician for the wiring.
Can underfloor heating be used as my primary heat source?
|
Bookmark with: